Roller Curve
Roll curve is suitable for the transport of containers and cartons. The frame profile is an aluminum profile, while the support rollers are made of galvanized steel pipe with conical KU moldings. The idlers are equipped with low-noise bearings. The drive unit is arranged underneath the conveyor. Straight sections are possible on inlet / outlet as well as on both sides. Indoor use at normal room temperature. The roll curve are available in versions with 30 °, 45 °, 60 °, 90 ° -180 °. Optional adjustable side guides with synthetic slide rails. |
||
Roller curve – Type 314.20 • Gravity curve with rollers as supporting means • reversible |
Roller curve – Type 314.21 • Gravity curve with rollers as supporting means • reversible |
Roller curve – Type 314.30 • Drive via motorized roller (24V) • driven from roll to roll via Poly-V / round belts • reversible |
![]() |
![]() |
![]() |
Roller curve – Type 314.31 • S-roller curve • Drive via motorized roller (24V) • driven from roll to roll via Poly-V / round belts • reversible |
Roller curve – Type 314.32 • Drive under the conveyor (400V) • driven from roll to roll via Poly-V-belts • reversible |
Roller curve – Type 314.33 • S-roller curve • drive under the conveyor (400V) • driven from roll to roll via poly-belts • reversible |
![]() |
![]() |
![]() |
Roller curve – Type 314.34 • Drive by exaggeration • driven from roll to roll via Poly-V / round belts • reversible |
Roller curve – Type 314.40 • cardioid • drive via motorized roller (24V) • driven from roll to roll via Poly-V / round belts • not reversible |
Roller curve – Type 314.42 • cardioid • drive under the conveyor (400V) • driven from roll to roll via Poly-V-belts • not reversible |
![]() |
![]() |
![]() |