Right Angle / Parallel Transfer

 
The Transfer / stroke converter is suitable for horizontal transport of containers and cartons to sluice these parallel or rectangular from the transport flow.
The frame consists of bolted sheet metal profiles in standard RAL colors. The carrying device comprises toothed belts. The drive is located underneath the stroke converter.
Indoor use at normal room temperature. Stroke pneumatic and optional additional toothed belt strands are possible.
Transfer – Type 355.10
• with parallel stroke
• Pneumatic stroke
• over 1 conveyor
Hubumsetzer – Typ 355.10
with parallel stroke
• Pneumatic stroke
• cantilevered on one side
Hubumsetzer – Typ 355.10
• with parallel lift
• Pneumatic stroke
• cantilevered on both sides
Transfer – Type 355.11
• with parallel stroke
• Motor-driven stroke
• over 1 conveyor
Hubumsetzer – Typ 355.11
• with parallel lift
• Motorized stroke
• cantilevered on one side
Hubumsetzer – Typ 355.11
• with parallel lift
• Motorized stroke
• cantilevered on both sides
Transfer – Type 355.20
• with parallel stroke
• Pneumatic stroke
• 2-/3-stranded
• over 2 conveying sections
Hubumsetzer – Typ 355.20
• with parallel lift
• Pneumatic stroke
• 2- / 3-leg
• cantilevered
Hubumsetzer – Typ 355.20
• with parallel lift
• Pneumatic stroke
• 2- / 3-leg
• double deep
Transfer – Type 355.21
• with parallel stroke
• Motor-driven stroke
• 2 strands
• over 2 conveying sections
Hubumsetzer – Typ 355.21
• with parallel lift
• Motorized stroke
• 2-leg
• cantilevered
Hubumsetzer – Typ 355.21
• with parallel lift
• Motorized stroke
• 2-leg
• double deep
Transfer – Type 355.30
• with parallel stroke
• Pneumatic stroke
• 2-/3-stranded
• over 3 conveying sections
Transfer – Type 355.31
• with parallel stroke
• Motor-driven stroke
• 2-/3-stranded
• over 3 conveying sections
Transfer – Type 355.80
• excavation device
• with swivel stroke
• Pneumatic stroke
Transfer – Type 355.90
• with swivel stroke
• Pneumatic stroke
• Belt drive from StRF
Transfer – Type 357.01
• Parallel stroke over one conveyor, one-sided
• Lift drive via stepper motor (24V)
• reversible
Transfer – Type 357.01
• Parallel stroke over one conveyor, cantilevered on one side
• Lift drive via stepper motor (24V)
• reversible roller conveyor
Transfer – Type 357.01
• Parallel stroke over one conveyor, on both sides
• Lift drive via stepper motor (24V)
• reversible
Transfer – Type 357.01
• Parallel stroke over one conveyor, cantilevered on both sides
• Lift drive via stepper motor (24V)
• reversible roller conveyor
Transfer – Type 357.01
• Parallel stroke over one conveyor, one-sided with graduation mix
• Lift drive via stepper motor (24V)
• reversible
• optimised belt spacing for 600×400 containers with peripheral edge
Transfer – Type 357.01
• Parallel stroke over one conveyor, with graduation mix on both sides
• Lift drive via stepper motor (24V)
• reversible
• optimised belt spacing for 600×400 containers with peripheral edge
Transfer – Type 357.02
• Parallel stroke over two conveying sections, cantilevered
• Lift drive via stepper motor (24V)
• reversible roller conveyor
Transfer – Type 357.02
• Parallel stroke over two conveying sections, continuous
• Lift drive via stepper motor (24V)
• reversible
Transfer – Type 357.03
• Parallel stroke over three conveying sections, cantilevered
• Lift drive via stepper motor (24V)
• reversible roller conveyor
F-RAT – Type 357.10
• F-RAT, throughput-optimized
• parallel stroke over one conveyor, continuous
• Lift drive via motorized roller (24V)
• reversible
 Posted by at 8:56 am