Miniload Handling Devices For Bins, Trays, Containers, Cartons, Boxes

 
LHD Load Handling Devices for variety of goods eg. tote bins, cartons, trays, boxes.
Special load handling devices for engine blocks, motor blocks or special workpiece carriers
Important Characteristics:-

  • Easy, Precise Interface With Conveyed Goods
  • High Functional Safety
  • Flexible, Adjustable And Usable
  • Low Space Requirements
  • Fast Handover Times
  • Decisive For High Storage Capacity
  • Safe And Quick Access To Single/Multi Depth Conveyed Goods
Grippers Telescopic Slides Telescopic Slide With Belts
  • High process assurance through form fit
  • No excavation in a vertical direction necessary
  • High throughput
  • Space-saving through reduced free space between containers and next shelf compartment
  • Storing and withdrawing can take place almost simultaneously in the reception area through belt drives or motor rollers
  • Clamp movement in 0.4 seconds
  • Loading equipment height from 0.12 m
  • Extremely high weights possible
  • Multi-depth storage
  • Various containers (also different sizes)
  • Storing and withdrawing can take place almost simultaneously in the reception area through belt drives
  • Relocations can be sped up using belt drives with multiple container positions
  • Angle adjustment of up to 10°
  • Double depth storage possible
  • Short depositing and output times
  • Storing and withdrawing can take place almost simultaneously in the reception area through the use of belt drives
  • Angle adjustment of up to 10°
Extractor Multiform Gripper Passive Multiform Gripper Active  
  • High storage density
  • No lifting of the trays in the storage compartment necessary
  • Form fit extraction of the trays – meaning high degree of process assurance
  • Throughput higher than with excavation technology due to fewer drive cycles
  • Lowest lifting equipment height lies at 0.34 m
  • Different LE lengths, widths and heights possible
  • Shelving can be used
  • Multi-depth storage possible
  • No vertical excavation – space-saving in the y-direction
  • Storing and withdrawing can take place almost simultaneously in the reception area through belt drives (or similar)
  • Clamp movement dependent on the width of the lifting equipment
  • Lengths and widths can vary
  • Different LE lengths, widths and heights possible
  • Shelving can be used
  • Multi-depth storage possible
  • No vertical excavation – space-saving in the y-direction
  • Storing and withdrawing can take place almost simultaneously in the reception area through belt drives (or similar)
  • Clamp movement dependent on the width of the lifting equipment
  • Lengths and widths can vary

 

 Posted by at 10:35 am