AS/RS Automatic Storage Retrieval For Small Parts, Containers, Cartons, Bins, Boxes, Trays

 

Several AS/RS Automatic Storage & Retrieval Systems Solutions Designed With Focus On:-

  • Low Energy Yet Efficient Transport
  • High Performance Efficient Storage Of Goods
  • Modularity For Increased Flexibility
  • Adaptability For Changing Layouts
  • High Reliability, Operator Ergonomic- Safety
  • Economical To Remain Global Competitive
  • Easy Access, Just-In-Time Readiness For Delivery
Load Handling Devices For Miniloads – Small Parts, Containers, Cartons, Bins, Boxes, Trays
Parallel Grippers Swivel Grippers Telescopic Slide
Telescopic Slide With Belts
High process assurance through form fit
Space saving with small clearance requirements
No vertical lifting required-higher throughput
Optimised for shuttle technology
Storing-Retrieval almost simultaneous with belt/roller drive
Clamp movement in 0.4 seconds, Loading equipment height from 0.12 m
High process assurance through form fit
Space saving with small clearance requirements
High operational safety by form-locking
No vertical lifting required-higher throughput
Optimised for shuttle technology
Storing-Retrieval almost simultaneous with belt/roller drive
Clamp movement in 0.4 seconds, Loading equipment height from 0.12 m
Extremely high weights possible
Multiple-depth storage
Handles various sizes / large containers
Almost simultaneous load/off-load at the P&D position
Relocations can be sped up using belt drives with multiple container positions
Angle adjustment of up to 10°
Multiple-depth storage with relocation
Short storage and removal times
Almost simultaneous load/off-load at the P&D position
Double depth storage possible
Short depositing and output times
Angle adjustment of up to 10°
Speed Loader Extractors Passive MultiForm Gripper Active MultiForm Gripper
Extremely fast handover times
No vertical lifting required
Multiple-depth
High storage density for trays
No vertical lifting of trays required
Form-locking extraction of the tray
High storage density
Throughput higher vs extractors due to fewer drive cycles
Lowest lifting equipment height lies at 0.34 m
Different Lifting Equipment Lengths, Widths And Heights Possible
Multiple-depth shelf storage. Shelving Can Be Used.
No additional equipment at the P & D position required
No Vertical Excavation Space-Saving In The Y-Direction
Clamp Movement Dependent On Width Of Lifting Equipment
Variable Lifting Equipment Lengths, Widths And Heights Possible
Multiple-depth shelf storage. Shelving Can Be Used.
No additional equipment at the P & D position required
No Vertical Excavation Space-Saving In The Y-Direction
Almost simultaneous load/off-load at the P&D position
Clamp Movement Dependent On Width Of Lifting Equipment
SRM Storage Retrieval Machines, AS/RS Cranes For Small Parts Storage Systems For Containers-Totes-Trays-Cartons-Boxes
Eco Speed ML1 – ML2- ML3- ML4 Lifting Beam

DHS Dynamic Handover System – Combination Of Stacker Crane & Shuttle Systems

  • This solution uses miniload stacker cranes and one level shuttle vehicles.
  • Shuttles move within rack, e.g. below first shelf level, serve goods to be stored and removed to storage retrieval machines working in aisles.
  • Shuttles reduces travel of cranes, Load Wt. vs. Total Wt.Ratio for Cranes 1:40, Shuttles 1:1.5. Hence less mass moved, saves >50% energy.
  • Simplified P&D layout, removes AS/RS pre-zone, brings P&D stations closer to storage area, makes handover to stations more dynamic
MLS Multi – Level Shuttles
  • Multi-Level-Shuttle is a highly dynamic shuttle system to serve several storage levels.
  • System based on rail-mounted shuttle, racking system with lifts, running rails and controls.
  • Storage system can be a multi-aisle with each aisle separated into several modules, dependent on warehouse height.
  • Each MLS system can access several warehouse levels. Suitable for cost-effective storage of many different types of products.
  • Amongst other uses, well suited for incoming-outgoing goods for GTP Order Picking Work Stations
  • Can be integrated with WMS for automatic provision of containers, trays or boxes for processing per requisite sequence.

OLS One Level Shuttles
  • One Level Shuttles serves single level handling totes-cartons-trays upto 50 kgs without integrated lift
  • Different products -container-carton sizes can be stored in same rack allowing better warehouse management.
  • Payload of 2 x 50 kg. High storage density by single, double or multi-deep storage
  • Shuttles moveable between levels if need do not justify dedicated shuttles at each level.
  • Each lane is divided, depending on the storage height, in several levels.
  • Each lane has lifting devices for output of totes and/or for level changes of shuttles.
  • Location of shuttles can be adjusted as per demand in the specific lane.
  • Designed to fit integrated solution of shuttle, shelf, vertical conveyors, conveying technology.
  • Amongst other uses, well suited for incoming-outgoing goods for GTP Work Stations.

OLS X – One Level Shuttle That Can Travel Outside Racks Like AGV

 


  • Shuttle AGV works like a Shuttle and an optically guided AGV. Moves like shuttle within warehouse.
  • Leaves warehouse area, travels to deliver goods to GTP Goods-To-Person Order Picking Work Station like AGV.
  • Start distribution centres with small initial investment, configure and expand as company grows.
  • Warehouse system can consist of two or more aisles which are divided into multiple levels.
  • Integratibility into existing warehouses. Flexibility to use one or more shuttles on each level.
  • Various aisles interconnected via platforms. Hence rail-free, uncomplicated switching of vehicles between aisles.
  • Shuttles can leave racks, travel like AGV to supply containers to GTP work stations directly saving time.
  • Direct sequencing within warehouse eliminates need for expensive conveyor loops or sequencing towers.



 Posted by at 5:43 am